Concrete Deck Finisher

Model : MDF-1800EDR 

Master Deck Finisher

Model : MDF-1200EDR  

MDF1200EDR is fully assembled and can be loaded directly onto the cargo truck. 

Concrete Deck Finisher 

Model : MDF-1200EDR

The tinining in the direction of travel can be manufactured by field specifications such as depth and width.

Concrete Deck Finisher

Model : MDF-1200EDR

 

Master Deck Finisher

Model : MDF-1800EDR

Master Deck Finisher

Model : MDF-1800EDR



Concrete Deck Finisher 

Model : MDF-2400

1. Although the length of the finisher varies by model, it is possible to pack at a time from at least 4m to at most 31m in width.

2. One rear-lim is 3 m and can be adjusted according to the width of the road. Secure each rear-limit with six bolts.

3. There are four driving legs, with height adjustment and one driving leg can move 2.4m from side to side, making rail installation easier.

4. The former reverse reciprocating motion is an electric motor that can be adjusted at any speed on the left 

and right sides of the motor and uses sharp curves and circular flooring.

5. Power uses 220v-380V triangles and has no noise or smoke.

EASY TO OPERATE 

Operator can operate the Deck Finisher on the safe place using a remote controller.  

When barrier is encountered during operation. It is possible to stop roller carriage at any point or to change the moving direction manually.

Bridge Deck Finisher

Model : MDF-2400EDR

RAIL INSTALLATION 

It is required to install rail inside or outside the bridge.  

The reinforcement may be installed depending on the site situation when it is required 

to install the reinforcement outside he reinforcing bar. 

The disrance should be 50M or less between every tow props. 

 

MULTI-PURPOSE DECK FINISHER  

Auto/Manual Operation

Concrete spreading screw

Concrete Finishing Roller

Concrete Finishing Plate

It selects white cotton cloth or brush depending on the concrete surface conditions  

Roller carriage reciprocating chain.

Track along which Deck Finisher moves forward or backward.