Grouting Mixer Pump
Attached
Content
Model : MP-Series
Grouting Cement injection Pump
Grouting cement milk injection pump
The grouting injection pump is designed to control discharge and wireless control remote and the operator can control the discharge amount by one switch at the inlet side.
Cement milk injection pump, self-leveling mortar, milk pumping, spraying, mortar floor, mortar pump for brick, spraying walls, milk grouting,
Lime plaster, gypsum insulation, epoxy pumping work, etc.
You can operate all kinds of work with one equipment.
Grout Injection Mixer Pump
Model : MP-2000K1
It can freely control discharge amount by installing an inverter when cement milk injection. It can inject them with smooth work and no pulsation
Grout Injection Pump
Model : MP-2000K1
Saves the cost, time, and reduced labor costs by 60%.
1.Small, convenient and light-weight pumps are easier to fast work in narrow spaces.
2.Rotor stator pump is designed to pump evenly without any bumps.
3. In quiet spaces in residential areas, the machine is designed to operate quietly without noise.
4. It is designed to be simple to maintain and easy to use on-site
5. The operator can control on-off and discharge on the site, not at the pump side.
Grout Mixer Pump 2000K1
Model : MP-2000K1
Operate on/off with wireless control remote at the inlet side.
Specifications | |
Model |
MP-2000K1 |
Output |
50L/min(3㎥/h) |
Pressure |
25Bar |
Power |
220-380V/3-phase |
Motor |
7.5hp/5.5kw |
Horizontal distance |
150m |
Vertical distance |
60m |
Mixer motor |
5hp/3.7kw |
Mixer volume |
250L |
Loaded height |
1270mm |
Hopper volume |
0.3㎥ |
Dimension (L*W*H) |
2650*1550*1450mm |
Weight |
500kg |
Cement Injection Mixer Pump
Model : MP-3000K1
Grouting Injection Pump 3000K1
Model : MP-3000K1
InterGrout Mixer Pump
Model : MP-3000K1
MP-3000K1 Grouting milk pump in operation at site.
Cast iron pipe pile driving/pile head cutting
Block the inlet with a handle parker and milk injection / finish milk injection
Injecting cement milk under the pressure of MP-3000K1 30 bar
Block the inlet with a Parker and inject cement milk to fill the pipe.
Specifications | |
Model | MP-3000K1 |
Output | 0-80L/min(4.8㎥/h) |
Pressure | 30Bar |
Power | 380V/3-phase |
Motor | 10hp/7.5kw |
Horizontal distance | 250m |
Vertical distance | 150m |
Mixer motor | 5hp/3.7kw |
Mixer volume | 300L |
Loaded height | 1280mm |
Hopper volume | 0.4㎥ |
Dimension (L*W*H) | 2650*1550*1550mm |
Weight | 530kg |
InterGrout Mixer Pump 5000K1
Model : MP-5000K1
Grouting work site for sinkhole in the underground parking lot of the apartments
Large amount of discharge (160 liters per minute)
Designed for continuous grouting work
Pressure grouting work with manual packer
Specifications | ||
Model |
MP-5000K1 |
MP-6000K1 |
Output |
160L/min(9.6㎥/h) |
200L/min(12㎥/h) |
Pressure |
30 Bar |
30 Bar |
Power |
380V/3-phase |
380V/3-phase |
Motor |
15hp/11kw |
20hp/15kw |
Horizontal distance |
400 m |
600 m |
Vertical distance |
200 m |
300 m |
Mixer motor |
5hp/3.7kw |
5hp/3.7kw |
Mixer volume |
300 L |
300 L |
Loaded height |
1300 mm |
1300 mm |
Hopper volume |
0.4 ㎥ |
0.4 ㎥ |
Dimension (L*W*H) |
2700*1600*1600mm |
2700*1600*1600mm |
Weight |
550 kg |
580 kg |
GROUT FLOW METER
Flow & Pressure Measuring System
Model : GF-50-500
Grout flow meter is specially designed based on the discharge and pressure and discharge diameter of the grouting pump.
Grout flow meter is digital and is designed for LW, chemical, cement milk injection.
Reliable and high-quality construction with accurate injection volume and pressure by printing construction records.
Grout Flow Meter
Model : GF-50-500
Applicable methods
1. LW cement milk injection
2. Chemical injection CG M, SGB, etc.
3. SCW, SEC, ESC, etc.
4. JSP, JET, RJP, SIG, etc.
5. CIP. SIP, MIP, PIP, etc.
6. File drive
7. Custom-made for medium and low pressure injection and high pressure injection
Specification | ||
Model | GF50-500 | GF-50-300 |
Power | 220V / 60hz | 220V / 60hz |
Flow | 0~500 L/min | 0~300 L/min |
Pressure | 0~50bar (5.00MPa) | 0~90bar (9.00MPa) |
Accuracy | ±1% of full scale | ±1% of full scale |
Inlet Diameter | 50 mm | 50 mm |
Outlet Diameter | 50 mm | 50 mm |
Length | 530 mm | 400 mm |
Width | 400 mm | 390 mm |
Height | 750 mm | 720 mm |
Weight | 75 kg | 70 kg |
Grout Flow Meter GF20
Model : GF-20-60
Description
This is specially designed for L.W (Labiles Wasser Glass).
In case outlet diameter of injection pump is same as inlet diameter of this equipment, there will be no pressure drop and clogging.
Alarm will go off when injection pressure reach preset point.
Features
Injection status and data are recorded in real time on the recording paper in graph and letter each.
Automatic printout data Start: Year, month, day, hour, minute, machine No Finish: Hour, minute, hole No, injection volume per hole, total injection volume
No need to calculate injection volume as the above data is recorded on the recording paper automatically.
Specification | |||
Model | GF15-60 | GF20-60 | GF25-120 |
Power | 220V / 60hz | 220V / 60hz | 220V / 60hz |
Flow | 0~60 L/min | 0~60 L/min | 0~120 L/min |
Pressure | 0~60bar (6.00MPa) | 0~60bar (6.00MPa) | 0~60bar (6.00MPa) |
Accuracy | ±1% of full scale | ±1% of full scale | ±1% of full scale |
Inlet Diameter | 15 mm | 20 mm | 25 mm |
Outlet Diameter | 15 mm | 20 mm | 25 mm |
Length | 530 mm | 530 mm | 530 mm |
Width | 400 mm | 400 mm | 400 mm |
Height | 750 mm | 750 mm | 750 mm |
Weight | 60 kg | 65 kg | 65 kg |