Grout Worm Pump
Attached
Content
Grouting Injection Pump
SGP-Series
Grout Injection Pump
The SGP Injection Pump has a wireless remote control that allows the operator to control the discharge volume from the injection hole.
The Grouting Worm Pump suction hose can be used by putting it on the agitator or by connecting it under the flange valve.
Operating pressure of Grout pump is 25bar / 40bar.
The simple structure of the Grouting Pump makes it easy to clean the water after use and has no failure rate.
InterGrout Pump 200
Model : SGP-200
Discharge adjustment of Grout Injection Pump is 50 L/min.
Working pressure : High pressure injection of 25bar.
Maximum intake diameter is 72mm : It can be sucked by connecting it to the bottom of the agitator or by putting it on the top.
Discharge route : use the hose of 10-50mm.
Remote control switch radius : wired and wireless both available 200m.
Use of two pumps when using silicic acid.
4 divider : 1. Drug 2. Water 3. Cement 4. Water(quick cleaning inside the equipment and hose)
Grouting Injection Pump
Model : SGP-200
Cement Grout Injection Pump
Model : SGP-300I
Discharge adjustment of Grout Injection Pump is 80 L/min.
Working pressure 40bar.
Specitications | ||
MODEL | SGP-200 | SGP-300 |
Power | 380V/3-Phase | 380V/3-Phase |
Motor | 7.5hp/5.5kw | 10hp/7.5kw |
Output | 50L/min | 80L/min |
Pressure | 25Bar | 40Bar |
Inlet Diameter | 50m/m | 63m/m |
Outlet Diameter | 15-32mm | 15-38mm |
Horizontal distance | 150m | 250m |
Vertical distance | 80m | 150m |
Length | 1700mm | 1900mm |
Width | 400mm | 500mm |
Height | 400mm | 500mm |
Weight | 60kg | 80kg |
Grouting Mixer Pump Plant
Model : AW-1330
Twin Pump Cement Milk Injector Pump & Bentonite Injector Pump
Maximum pressure : 30bar
Maximum discharge volume : 80L/min
Maximum horizontal distance : 250m
Hose inner diameter : 15-38mm
Grouting Mixer Pump Plant
Model : AW-1330
Specifications | ||
Model | AW-1320 | AW-1330 |
Power | 380V/3-Phase | 380V/3-Phase |
Grout Pump | 2unit | 2unit |
Pump motor | 7.5hp / 5.5kw | 10hp / 7.5kw |
Output | 0-50 L/min | 0-80 L/min |
Pump Motor | 7.5hp / 5.5kw | 10hp / 7.5kw |
Output | 0-50 L/min | 0-80 L/min |
Pressure | 25 bar | 30 bar |
Inlet diameter | 10-50 mm | 10-50 mm |
Outlet diameter | 10-38 mm | 10-38 mm |
Horizontal distance | 150 m | 250 m |
Vertical distance | 80 m | 150 m |
Mixer | 1unit | 1unit |
Mixer volume | 300 Liter | 300 Liter |
Mixer motor | 3hp / 2.2kw | 3hp / 2.2kw |
Agitator | 1unit | 1unit |
Agitator volume | 650 L/min | 650 L/min |
Agitator motor | 5hp / 3.75kw | 5hp / 3.75kw |
Length | 4200 mm | 4200 mm |
Width | 1800 mm | 1800 mm |
Height | 1650 mm | 1650 mm |
Weight | 950 kg | 1150 kg |
Cement Injection Pump 500
Mofel : SGP-500I
Suggested for long working, large spot and long distance transport.
Maximum discharge rate is 0-1000L/min.
Maximum horizontal distance is 600-1000m.
Specitications | |||
MODEL | SGP-500I | SGP-600I | SGP-600S |
Power | 380V/3-Phase | 380V/3-Phase | 380V/3-Phase |
Motor | 15HP | 20HP | 20HP |
Output | 0-300L/min | 0-500L/min | 0-900L/min |
Pressure | 25Bar | 25Bar | 25Bar |
Inlet Diameter | 50mm | 50mm | 50mm |
Outlet Diameter | 15-50mm | 15-50mm | 15-50mm |
Horizontal distance | 600m | 1000m | 600m |
Vertical distance | 300m | 500m | 300m |
Length | 2550mm | 2650mm | 2650mm |
Width | 600mm | 600mm | 650mm |
Height | 1650mm | 165mm | 165mm |
Weight | 490kg | 490kg | 550kg |
* Option : Adjusting discharge volume(I) / Wireless remote control switch(R) |
Grout Injection Pump
Model : SGP-500A
Model of Inter Grouh Worm Pump SGP500A / SGP-600A can control the discharge volume.
It boasts a large amount of discharge and maximum distance.
The Inter Grout Worm Pump can be manufactured up to a maximum distance of 1500m according to the conditions of the site.
Grout Cement Injection Pump
Model : SGP-600
Grouting Injection Worm Pump
Model : SGP-600A
Specitications | |||
MODEL | SGP-500A | SGP-600A | SGP-600S |
Power | 380V/3-Phase | 380V/3-Phase | 380V/3-Phase |
Motor | 15HP | 20HP | 20HP |
Output | 300L/min | 400L/min | 800L/min |
Pressure | 20Bar | 25Bar | 25Bar |
Inlet Diameter | 76m/m | 76m/m | 76m/m |
Outlet Diameter | 16-76mm | 16-76mm | 16-76mm |
Horizontal distance | 400m | 600m | 300m |
Vertical distance | 200m | 300m | 150m |
Length | 1900mm | 2000mm | 2000mm |
Width | 500mm | 600mm | 600mm |
Height | 500mm | 500mm | 500mm |
Weight | 140kg | 150kg | 150kg |
Mixer & Agitator
Model : MA-1300A
Mixer & Agitator Specification
Model | MA-1300A |
Mixer | |
Mixer Dia | 900mm |
Height | 550mm |
Volume | 300L |
Slot | 620x270mm |
Slot height | 1.2m |
Motor | 3hp/2.2kw |
RPM | 700rpm |
Power | 380V/3-phase |
Agitator | |
Mixer Dia | 1300mm |
Height | 500mm |
Volume | 600L |
Motor | 3hp 2.2kw |
RPM | 20rpm |
Power | 380V/3-phase |
Water tank | |
Volume | 200L |
Full size | |
Length | 2700mm |
Width | 1400mm |
Max Height | 1970mm |
Total weight | 780kg |
Grout Flowmeter
Flow & Pressure Measuring System
Model : GF20-60
Grout flow meter is necessary for grouting work at various construction sites, especially at foundation work, to guarantee precise construction work and to prevent a shoddy and fault job.
It records the status of work and construction data in graph and letter each on the recording paper and so no need to calculate injection volume and depth separately.
■ Description
● This is designed specially for L.W (Labiles Wasser Glass).
● In case outlet diameter of injection pump is same as inlet diameter of this equipment, there will be no pressure drop and clogging.
● Alarm will sound if injection pressure reach preset point.
■ Features
● Injection status and injection data are recorded in real time on the recording paper in graph and letter each.
● Automatic printout data Start: Year, month, day, hour, minute, machine No Finish: Hour, minute, hole No, injection volume per hole, total injection volume
● No need to calculate injection volume as the above data is ecorded on the recording paper automatically.
Specification | |||
Model | GF15-60 | GF20-60 | GF25-120 |
Power | 220V / 60hz | 220V / 60hz | 220V / 60hz |
Flow | 0~60 L/min | 0~60 L/min | 0~120 L/min |
Pressure | 0~60bar(6.00MPa) | 0~60bar(6.00MPa) | 0~60bar(6.00MPa) |
Accuracy | ±1% of full scale | ±1% of full scale | ±1% of full scale |
Inlet Diameter | 15 mm | 20 mm | 25 mm |
Outlet Diameter | 15 mm | 20 mm | 25 mm |
Length | 530 mm | 530 mm | 530 mm |
Width | 400 mm | 400 mm | 400 mm |
Height | 750 mm | 750 mm | 750 mm |
Weight | 60 kg | 65 kg | 65 kg |