GROUT FLOW METER
Content
Model : GF-Series
GROUT FLOW METER
Flow & Pressure Measuring System
Grout flow meter is necessary for grouting work at various construction sites,
especially at foundation work, to guarantee precise construction work and to prevent a shoddy and fault job.
It records the status of work and construction data in graph and letter each on the recording paper
and so no need to calculate injection volume and depth separately.
Grout Flow Meter GF50
Model : GF-50-300
High Pressure Injection
Description
This system is suitable for such high pressure method as JET.
This is also suitable for other high pressure injection methods(cement milk, chemical liquids).
In general, injection flow and injection pressure are about 60 L/min and about 20.0 MPa 〜 50.0 MPa each.
Features
Injection status and injection data are recorded in real time on the recording paper in graph and letter each.
Automatic printout data Start : Hour, minute, month, date, year, machine No. Finish: Hour, minute, hole No, injection volume per hole, accumulated injection volume.
No need to calculate injection volume as the above data is recorded on the recording paper automatically.
Applicable methods
1. JET
2. J.S.P (Jumbo Special Pile)
3. Cement milk
4. Other high pressure injection methods.
Specification | |
Model | GF50-300 |
Power | 220V / 60hz |
Flow | 0~300 L/min |
Pressure | 0~90bar (9.00MPa) |
Accuracy | ±1% of full scale |
Inlet Diameter | 50 mm |
Outlet Diameter | 50 mm |
Length | 400 mm |
Width | 390 mm |
Height | 720 mm |
Weight | 70 kg |
Grout Flow Meter GF50
Model : GF50-500
Low Pressure Injection
Description
This system is suitable for such low pressure injection method as S.C.W (Soil Cement wall).
This is also suitable for other low pressure injection methods(cement milk, chemical liquids).
In general, injection flow and injection pressure are about 300 L/min and about 0.5 MPa 〜 2.5 MPa each.
Features
Injection status and injection data are recorded in real time on the recording paper in graph and letter each.
Automatic printout data Start : Hour, minute, month, date, year, machine No. Finish: Hour, minute, hole No, injection volume per hole, accumulated injection volume.
No need to calculate injection volume as the above data is recorded on the recording paper automatically.
Applicable methods
1. S.C.W (Soil Cement Wall)
2. JC-CGM (Just Chemical Grouting Method)
3. Cement milk
4. Other low pressure injection methods
Specification | |
Model | GF50-500 |
Power | 220V / 60hz |
Flow | 0~300 L/min |
Pressure | 0~50bar (5.00MPa) |
Accuracy | ±1% of full scale |
Inlet Diameter | 50 mm |
Outlet Diameter | 50 mm |
Length | 530 mm |
Width | 400 mm |
Height | 750 mm |
Weight | 75 kg |
Grout Floe Meter GF15
Model : GF15-60
Description
This is designed specially for chemical liquids (J.C.M, S.G.R, C.G.M) injection.
In case outlet diameter of injection pump is same as inlet diameter of this equipment, there will be no pressure drop and clogging.
Alarm will sound if injection pressure reach preset point.
Features
Injection status and injection data are recorded in real time on the recording paper in graph and letter each.
Automatic printout data Start: Hour, minute, month, date, year, machine No Finish: Hour, minute, hole No, injection volume per hole, total injection volume
No need to calculate injection volume as the above data is recorded on the recording paper automatically.
Applicable methods
1. Chemical liquids(J.C.M, S.G.R, C.G.M, etc)
2. L.W
3. Cement milk
4. Other low pressure injection methods
Specification | |
Model | GF15-60 |
Power | 220V / 60hz |
Flow | 0~60 L/min |
Pressure | 0~60bar (6.00MPa) |
Accuracy | ±1% of full scale |
Inlet Diameter | 15 mm |
Outlet Diameter | 15 mm |
Length | 530 mm |
Width | 400 mm |
Height | 750 mm |
Weight | 60 kg |
Grouting Flow Meter GF20
Model : GF20-60
Description
This is designed specially for L.W (Labiles Wasser Glass).
In case outlet diameter of injection pump is same as inlet diameter of this equipment, there will be no pressure drop and clogging.
Alarm will sound if injection pressure reach preset point.
Features
Injection status and injection data are recorded in real time on the recording paper in graph and letter each.
Automatic printout data Start: Year, month, day, hour, minute, machine No Finish: Hour, minute, hole No, injection volume per hole,
total injection volume
No need to calculate injection volume as the
above data is recorded on the recording paper
automatically.
Applicable methods
1. L.W
2. Chemical liquids(J.C.M, S.G.R, C.G.M, etc )
3. Cement milk
4. Other low pressure injection methods
Specification | |
Model | GF20-60 |
Power | 220V / 60hz |
Flow | 0~60 L/min |
Pressure | 0~60bar (6.00MPa) |
Accuracy | ±1% of full scale |
Inlet Diameter | 20 mm |
Outlet Diameter | 20 mm |
Length | 530 mm |
Width | 400 mm |
Height | 750 mm |
Weight | 65 kg |
Grout Flow Meter GF25
Model : GF-25-120
Description
This is designed specially for L.W (Labiles Wasser Glass).
In case outlet diameter of injection pump is same as inlet diameter of this equipment, there will be no pressure drop and clogging.
Alarm will sound if injection pressure reach preset point.
Features
Injection status and injection data are recorded in real time on the recording paper in graph and letter each.
Automatic printout data Start: Year, month, day, hour, minute, machine No Finish: Hour, minute, hole No, injection volume per hole, total injection volume
No need to calculate injection volume as the above data is recorded on the recording paper automatically.
Applicable methods
1. L.W
2. Cement milk
3. Other low pressure injection methods
Specification | |
Model | GF25-120 |
Power | 220V / 60hz |
Flow | 0~120 L/min |
Pressure | 0~60bar (6.00MPa) |
Accuracy | ±1% of full scale |
Inlet Diameter | 25 mm |
Outlet Diameter | 25 mm |
Length | 530 mm |
Width | 400 mm |
Height | 750 mm |
Weight | 65 kg |